Vitek VT-H41 Betriebsanweisung PDF herunterladen (Seite 47)

VT-H41



ALARM - Select an event to link with alarm using  buttons.

OFF: An event signal is NOT linked with the external alarm.

SENSOR: A sensor event signal is linked with the external alarm.

MOTION: An event signal of motion is linked with the external alarm.

VIDEO LOSS: An event signal of video loss is linked with the external alarm.

HDD FAIL: An event signal of HDD failure is linked with the external alarm.

ALL: Every event signal is linked with the external alarm.

BEEP - Select an event to link with beep using  buttons.

OFF: An event signal is NOT linked with the internal beep.

SENSOR: A sensor event signal is linked with the internal beep.

MOTION: An event signal of motion is linked with the internal beep.

VIDEO LOSS: An event signal of video loss is linked with the internal beep.

HDD FAIL: An event signal of HDD failure is linked with the internal beep.

ALL: Every event signal is linked with the internal beep.

ALARM/BEEP DURATION - Select the length of alarm and beep output using  buttons.

Setting values: 5 / 6 / 7 ~ 57 / 58 / 59 / 60 seconds

PTZ - PTZ control setting



Connect the RS-485 cables of PTZ camera to the RS-485 port on the rear panel.



Press SEL button to enter the menu. Then PTZ menu screen is displayed. Select

the Specific CAMERA CHANNEL, CAMERA TYPE, CAMERA SPEED, and ID.



Press the PTZ button on the front panel. The control screen will appear. Highlight

the item to select and control the cameras by using the UP and DOWN or LEFT

and RIGHT buttons.

Item Description

PAN / TILT Use the UP or DOWN button for TILT and LEFT or RIGHT button

for PAN of the selected camera.

ZOOM / Use the UP or DOWN button for ZOOM in or out and LEFT or

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 75 76

Keine Kommentare

Vitek VT-H41 Betriebsanweisung Seite 47