Vitek VT-H41 Betriebsanweisung PDF herunterladen (Seite 45)

VT-H41



RESOLUTION – Select the resolution for the recording using  buttons.

352x240: The input video is recorded as 352x240 resolution.

704x240: The input video is recorded as 704x240 resolution.

704x480: The input video is recorded as 704x480 resolution.

Setting of CHANNEL - Select CHANNEL to set the recording setting as below using 

buttons

FRAME RATE – Set the frame rate value using  buttons.

The total frame rate when resolution is 704X480(NTSC) / 704X576(PAL): 30

/ 25

The total frame rate when resolution is 352X240 (NTSC) / 352X288(PAL):

120 / 100

QUALITY – Select the quality of the recording video using  buttons.

Setting values: FINE, HIGH, NORMAL, ECONOMY, NETWORK (default : HIGH)

RECORDING BY – Select the recording mode using  buttons.

CONTINOUS: The input video is recorded when the DVR is turned ON.

MOTION: The input video is recorded when the motion is detected.

SENSOR: The input video is recorded when the external sensor is activated.

SCHEDULE: The input video is recorded according to SCHEDULE setting.

NONE: The input video is NOT recorded.

PRE RECORD – Select ON/OFF of the pre-recording on the event using  buttons.

ON: 1ips of video for 5 seconds is recorded before the event (motion

detection or sensor activation).

OFF: No pre-recording.

POST RECORD – Set the recording time after the event using  buttons.

Setting values: 5 ~ 30 seconds

AUDIO – Select ON/OFF of the audio recording using  buttons.

ON: The audio is recorded.

OFF: The audio is NOT recorded.

SCHEDULE – Set the recoding schedule of each channel.

The resolution setting is applied to every channel.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 75 76

Keine Kommentare

Vitek VT-H41 Betriebsanweisung Seite 45