Vitek VT-H41 Betriebsanweisung PDF herunterladen (Seite 46)

VT-H41



6-3. DEVICE

Item Description

CHANNEL Select the channel for applying the following settings.

MOTION ZONE Select Full Zone or Partial Zone for motion sensing.

MOTION SENSITIVITY Set the motion sensitivity for the specified channel.

SENSOR RECORDING Select the channel to link with sensor.

SENSOR Select the sensor for applying the following settings.

TYPE Set the type of sensor for the specified channel from none,

NORMAL OPEN & NORMAL CLOSE

ALARM Select from OFF, SENSOR, MOTION, VIDEO LOSS, HDD FAIL, &

ALL..

BEEP Select from OFF, SENSOR, MOTION, VIDEO LOSS, HDD FAIL, &

ALL...

ALARM/BEEP DURATION Set alarm and beep duration

PTZ PTZ control setting

REMOTE CONTROLLER

Select the ID of remote controller.

BUTTON TONE Enable / Disable the sound tone of front buttons.

CHANNEL - Select CHANNEL to set the recording setting as bellows using  buttons

MOTION ZONE – Select the motion zone type using  buttons.

FULL ZONE: The motion on the whole screen is detected.

PARTIAL ZONE: The motion on the pre-set detection grid is detected.

MOTION SENSITIVITY – Set the level of motion detection sensitivity using  buttons.

SENSOR RECORDING – Select the sensor to link with the recording channel using 

buttons.

SENSOR - Select a sensor to set the type using  buttons

TYPE – Select the external sensor type using  buttons.

---: No operation NORMAL OPEN: Normally open type sensor NORMAL

CLOSE: Normally closed type sensor

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 75 76

Keine Kommentare

Vitek VT-H41 Betriebsanweisung Seite 46