Vitek VT-3496 Technical Information PDF herunterladen (Seite 31)

VT-EH Series DVRs________________________________________________________________________________

NETWORK

Click the NETWORK menu and determine each value.

NETWORK: IP SETUP

Click the IP SETUP menu.

DHCP: When enabled, the DVR will obtain an IP address automatically if it is connected to a DHCP server or router.

WEB SERVICE: When enabled, it allows remote connections using Internet Explorer or other web browsers.

IP ADDRESS: If DHCP is not being used, the IP address can be manually set.

GATEWAY: If DHCP is not being used, the gateway IP address can be manually set.

SUBNET MASK: If DHCP is not being used, the subnet mask can be manually set.

1ST DNS SERVER: If DHCP is not being used, the first DNS server can be manually set.

2ND DNS SERVER: If DHCP is not being used, the second DNS server can be manually set.

RTSP SERVICE PORT: If the connected Router supports UP&P (Universal plug and play) function,

clicking AUTO PORT will automatically complete the port forwarding.

Clicking DELETE PORT will delete the port, and PORT TEST will test the ports.

WEB SERVER PORT: If the connected Router supports UPNP (Universal plug and play), clicking AUTO PORT will

automatically complete the port forwarding. Clicking DELETE PORT will delete the port, and

PORT TEST will test the ports. The Web Server Port is also the port number that the DVR uses to

support remote connection from Internet Explorer or other web browsers.

ALIAS: When you enter the DDNS HOST NAME in DDNS setup (Next page), you can see the information here (only

when connected to a UPNP router.

MAX TX SPEED: Specifies the maximum bandwidth that the DVR can use during a remote connection.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 80 81

Keine Kommentare

Vitek VT-3496 Technical Information Seite 31