Vitek VTC-IR302FN Spezifikationen PDF herunterladen (Seite 170)

ENVI Series: VTC-IR302FN

169

Name

Type in the name of the IP-Device.

IP Address

Type in the IP Address to use with the IP-Device. IPCCTVDNS or URL

addresses are also supported. (If Input IP Address Range box is checked,

then the starting address of the range will be selected.)

Input IP Address

Range

Enter the last IP address of the range.

Getting Information

from IP-Device

Check this box if the information from IP-Device needs to be acquired.

VS Module ID

Select the VS Module ID. Enter 0 for non-Vitek IP devices. Vitek products

can be set to 0 to 15, and default is 0.

HTTP Port

Enter the HTTP Port to use with the IP-Device. (Default is 80)

RTSP Port

Enter the RTSP Port (Default is 554)

Type in the Login ID to use. (Default is root)

Type in the Login Password to use for the Login ID. (Default is root)

Confirm Password

Type in the same password to confirm. (Default is root)

Checking available

resolution

Select the Video Resolution for the device.

Not used, all resolution is done

at camera level

Checking available

PTZ camera

Checkboxes to choose if PTZ is supported on the IP device.

Click this button to apply the configured values.

Cancel

Click this button to discard the configured values.

36.2. IP-Device Registration (Automatic)

To register an IP-Device by automatic scanning, click IP-Device, Camera Management on the menu

tree. Then Click Scan available IP devices and register

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 192 193

Keine Kommentare

Vitek VTC-IR302FN Spezifikationen Seite 170