Vitek VT-ST1620 Bedienerhandbuch PDF herunterladen (Seite 131)

SAGA “ST” Series

130

e. Use IP Server

The DVR can be located on the internet using the MAC address displayed in the

status screen. If the MAC address is to be used, “Use IP Server” box must be

checked.

f. Domain Name / Use DDNS

The DVR can be located on the internet using a domain name, or a web address.

The DVR must be registered with a Dynamic DNS service in order to be located. If

the Domain Name is to be used, “Use DDNS” box must be checked.

g. Serial Port

Select the COM port and the baud rate if RS-232C or RS-485 protocols are used to

connect to the DVR.

h. Password

Enter the password to access the DVR remotely. The password level entered will

grant the access privileges assigned by the administrator.

i. Description

Add comments or notes to the DVR in this box.

j. Add

Once all the information for the DVR has been entered, click on ADD to add to the

DVR list.

k. Change

After changing the DVR information, click on CHANGE to update the DVR

information.

l. Delete

Highlight a DVR from the DVR List and then click on DELETE to remove from the

DVR List.

m. Connect

Highlight a DVR from the DVR List and then click on CONNECT to remotely connect

to the DVR.

n. Cancel

Click on CANCEL to exit from the DVR List menu.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 183 184

Keine Kommentare

Vitek VT-ST1620 Bedienerhandbuch Seite 131